The Sky Mounti Inclinometer - Mounting Instructions

"How-To" Slide Show
Opens in Pop Up Window

IMPORTANT: Please DO NOT OVER-TIGHTEN the bolts. Doing this can weaken or break the under-bracket.

Progressively tighten the bolts (one side then the other) until the Inclinometer begins to tighten on the bar but can still be adjusted by hand. Then, with the bike on a level surface, hand position the Inclinometer until the bubble reads "zero". Then tighten each bolt another half-turn or so, and you're ready to ride.

FRICTION STRIP:
It is not necessary to use the entire rubber friction strip. The only purpose for this strip is to keep the inclinometer from rotating on the bars. Depending on bar diameter and fit, you may want to trim this strip to make installation easier.